CNC Mill Operator/Machinist (Mazak) - 1st Shift
Mark Andy Inc
- Chesterfield, MO
- Permanent
- Full-time
- Perform duties required to set up, operate Mazak CNC milling machines and inspect parts
- Perform set up on CNC mill, such as: collect required tools, set stops, locate and indicate vises and fixtures, fabricate fixture if one is not available, "zero out" part and tools, install tools into carousel, input run data manually into machine and transfer data to a disk using a CMT or DNC unit or if program has already been made transfer data from disk to machine memory using the CMT or DNC unit, etc.
- Using blueprints, program information, hand tools, etc.
- Maintain file of program information and set up sheets, update revisions as required
- Operate cnc mill: load material into fixtures or vises, clamp material down, machine material, such as: c'drill, drill, ream, tap, bore, mill, etc.
- Inspect bored and reamed holes while running, make tool adjustments, unload parts and deburr
- Edit program information as required
- Load additional pallets while parts on first pallet are being machined
- Inspect parts with hole and depth micrometers, plug and thread gauges, calipers, surface plate, height gages, etc.
- Complete quality checks as required
- Hold tolerance per print
- Collaborate with foreman and manufacturing engineers to verify and/or change shop routers to facilitate manufacture of parts
- Assist engineering department by machining prototype parts and evaluate machinability of parts
- Check and maintain oil levels, add coolant as needed, empty coolant drain pan, clean coolant filters, check chip conveyor operation, maintain area in a clean and orderly fashion, etc.
- Operate other machines, including CNC machines, as trained/required
- Basic Machine shop knowledge
- Capable of performing proven setups and first part run with minimal assistance.
- Capable of making minimal edits and revision changes to existing programs but not yet proficient at all skills required and may require occasional assistance from team
- Maintain a safe and organized work environment. Fulfill daily 5 S and required PM duties. Complete these on consistent basis.
- Must maintain quality parts and low scrap rate which is subject to review by team leaders based on quality issues within cell and/or per IRAD reports.
- High School Degree or Equivalent
- Mazak CNC and/or equivalent skills
- Mill CNC or comparable experience a plus
- Regularly required to sit, stand, bend, reach, climb, stoop, kneel, and crouch and move about facility and/or customer’s facilities. Frequent lifting up to 50 pounds.
- Moderate to frequent exposure to shop environment; may be exposed to dust, odors, oils, fumes, chemicals, noise and moving parts. Work typically requires the usage of PPE and can require work on the facility’s production floor or customer’s production environment.
- Competitive wages
- Air conditioned facility
- Tuition Reimbursement
- Generous paid time off program
- Medical, dental and vision benefits
- 401k plan with company match
- Valuable employee discounts on cell phone plans, electronics and cars
- Employee Assistance Program
- Pet Insurance
- Earned wage access (on-demand pay) available through ZayZoon